Honest & reliable contractors · Since 2018

M-107 Commercial Services

Commercial glass work with the engineering letter prepared in-house

Storefront glazing, office partitions, curtain wall, glass guards and curved glass for commercial buildings, with the engineering documentation prepared by our own department.

  • One of few curved-glass suppliers
  • Engineering letters prepared in-house
  • Free estimates on every project

Free, no-obligation estimate. We typically reply within 24 hours.

A modern commercial building entrance: storefront glazing, curtain wall and glass canopy
Interior frameless glass office partitions with a glass door along a corridor
A glass guard along a mezzanine edge in a commercial lobby
Since 2018Honest & reliable contractors
In-house engineeringDrawings, letters & permits
The MKC GuaranteeOn time, within budget
162+ projectsAcross Toronto & the GTA

M-107.1 Why MKC

Why choose MKC for commercial glass work

Commercial glass has to look right and carry real loads: wind on a storefront, people leaning on a guard, a door swinging hundreds of times a day. MKC supplies and installs storefronts, partitions, curtain wall and guards, and we are one of few curved glass suppliers in the GTA. Our in-house engineers prepare the letters and drawings a permit or inspector asks for, so the glass is not held up waiting on an outside consultant.

Featured

Glass, engineered

Glass in guards and large panels has to meet the Ontario Building Code’s safety glazing and load rules. Our engineers specify the glass type, thickness and anchoring, and prepare the engineering letter or drawing where one is required.

M-107.2 Scope

What’s included

  • M-107.1StorefrontsAluminum-framed entrances and display glazing for retail and restaurants.
  • M-107.2Office partitionsFramed and frameless glass walls and doors for meeting rooms.
  • M-107.3Curtain wallGlazed facade systems for new buildings and recladding.
  • M-107.4Glass guardsRailings for balconies, mezzanines and stairs, engineered for guard loads.
  • M-107.5Curved glassCurved panels for facades, partitions and feature walls.
  • M-107.6Engineering lettersLetters and drawings for permits and inspections, prepared in-house.

M-107.3 Budget & schedule

What affects
the price

Every estimate is built from your measurements and choices. These are the things that move the number most.

Typical timeline

Once glass arrives, partitions and storefront replacements are usually installed in days, while curtain wall runs longer. Fabrication lead time, especially for laminated or curved glass, usually sets the schedule.

Every project is different, so your estimate comes with its own written schedule, and we aim to beat the usual industry timeline on every job.

  1. 01
    Glass type

    Tempered, laminated, heat-strengthened, low-iron and coated glass each change the price per panel.

  2. 02
    Panel size and weight

    Large panels need lifting equipment, a bigger crew and sometimes after-hours street access.

  3. 03
    Framing system

    Standard storefront framing costs less than structural silicone, point-supported or frameless systems.

  4. 04
    Curved and custom shapes

    Curved glass is made to order for each radius, which adds cost and lead time.

  5. 05
    Engineering and approvals

    Guards and large exterior glazing may need engineering letters or permit drawings.

G-003 How we work

How we deliver your commercial glass

  1. 1

    Free Estimate

    Tell us what you have in mind. We review your space and goals and give you a clear estimate at no cost.

  2. 2

    Planning + Permits

    We finalize design and scope. Our in-house engineering team prepares drawings, engineering letters and permit applications.

  3. 3

    Material Procurement

    We order equipment and materials early, confirm lead times and schedule deliveries around shutdowns and site access.

  4. 4

    Construction Process

    Our crews build to code with site supervision and regular updates, so you always know where things stand.

  5. 5

    Project Completion

    Final inspection, walkthrough and clean-up. On time, within budget and beyond expectations. That is the MKC Guarantee.

Plan your project
with a free estimate.

We review your space and goals and give you a clear estimate at no cost.

M-107.4 Questions

Questions about commercial glass work

Don’t see your question? Call (647) 637-6052 or ask in your estimate request.

Why does curved or laminated glass cost more?

Curved glass is bent over a mould made for your radius, so every panel is made to order. Laminated glass adds a bonded interlayer and extra processing. Both take longer to fabricate and are heavier to handle on site. As one of few curved glass suppliers in the GTA, we can tell you early whether a curve is practical for your design and budget.

Can you replace a storefront without closing the store?

Usually, yes. We measure and fabricate before removing anything, then replace sections in a planned order so the building is secured at the end of each day. Plywood or temporary hoarding covers any opening that cannot be closed the same day. Where the layout allows, the entrance is done last or in phases, so customers always have a way in.

What does the Building Code require for glass guards?

In houses and small buildings, the Ontario Building Code requires glass in guards to be laminated or tempered safety glass meeting CAN/CGSB-12.1, or wired safety glass, and every guard must resist the code’s specified loads. Larger buildings have their own glass rules. Many building departments, Markham’s among them, require glass guards to be engineered, with proof submitted before installation. Our engineers prepare that design and letter.

How do we maintain commercial glass and hardware?

Clean glass with non-abrasive products, check sealants and gaskets once a year for gaps, and keep door closers, pivots and patch fittings adjusted, because a sagging door wears its hardware fast. Report chips on tempered glass edges early, since edge damage can lead to breakage. We service glass door hardware and replace damaged panels.

When do we need an engineering letter for glass?

Usually for guards, overhead or sloped glazing, large panels and any glass that carries load, and often when a building department or a condo board asks for proof of design. Our in-house engineers prepare the letter or drawing for your project. MKC’s custom glass work comes with a free engineering letter; ask at your estimate whether your project qualifies.

G-009 Free estimate

Get a free estimate.
Claim up to $2,500 in savings.

Fill out the form to claim up to $2,500 in savings on your next project. Tell us what you’re planning and we’ll book a visit to see the space. Offer terms

  1. 1Tell us about the project (about a minute)
  2. 2We typically reply within 24 hours to book your visit
  3. 3We review your space and goals and give you a clear estimate at no cost
Head office135 Ormont Drive, Unit 11C, North York, ON M9L 1N6

What can we help you with?
(647) 637-6052Free estimate

Your project sheet

One estimate, one site visit and one contract for everything on this list.

    Typical order of work

      Get one estimate