Honest & reliable contractors · Since 2018

G-203 More Divisions

Smart building upgrades, from thermostats to EV charging

Smart thermostats and building controls, heat pumps, energy monitoring and EV-ready wiring, planned by our mechanical and engineering teams for homes and commercial buildings.

  • In-house mechanical division
  • In-house engineering department
  • Residential and commercial divisions

Free, no-obligation estimate. We typically reply within 24 hours.

A home garage with an EV charger, a wall-mounted home battery and a smart electrical panel
A smart thermostat on a living room wall showing a simple temperature graphic
A wall-mounted building automation touchscreen in a commercial mechanical room showing simple coloured graphics of equipment
Since 2018Honest & reliable contractors
In-house engineeringDrawings, letters & permits
The MKC GuaranteeOn time, within budget
162+ projectsAcross Toronto & the GTA

G-203.1 Why MKC

Why choose MKC for smart building upgrades

Efficiency upgrades pay off when they’re planned together. A heat pump needs controls that suit it, an EV charger needs room in the electrical panel, and building automation only saves energy if someone keeps it tuned. We start with what you run now and what it costs to operate, then plan upgrades in an order that makes sense, so this year’s work doesn’t block next year’s. Our mechanical and engineering teams design each upgrade and plan its installation.

Featured

Efficiency you can measure

Smart thermostats, sub-meters and building controls show where energy goes, before and after an upgrade. We set up the controls and monitoring so the change in runtime and consumption shows up in the data, and you can see what each upgrade did.

G-203.2 Scope

What’s included

  • G-203.1Smart thermostatsCompatible models set up for your heating and cooling equipment.
  • G-203.2Building controlsScheduling, zoning and sensors for commercial HVAC systems.
  • G-203.3Heat pumpsCold-climate air source systems sized for GTA winters.
  • G-203.4EV charging readinessPanel capacity check, wiring and conduit for a Level 2 charger.
  • G-203.5Energy monitoringMeters that show consumption by system, floor or tenant.
  • G-203.6Phased planningUpgrades ordered so each step supports the next.

G-203.3 Budget & schedule

What affects
the price

Every estimate is built from your measurements and choices. These are the things that move the number most.

Typical timeline

A smart thermostat or an EV charger circuit is usually a single visit. Heat pumps and commercial controls take longer to design, and equipment lead times and incentive pre-approvals often set the start date.

Every project is different, so your estimate comes with its own written schedule, and we aim to beat the usual industry timeline on every job.

  1. 01
    Electrical capacity

    Whether your panel and service can take a heat pump or EV charger, or need an upgrade first.

  2. 02
    Existing equipment

    Older furnaces, boilers and rooftop units limit which controls and heat pumps will work with them.

  3. 03
    Building size

    The number of zones, units, floors or parking spaces to wire, control and meter.

  4. 04
    Equipment choice

    Cold-climate heat pumps, control platforms and chargers vary widely in price and features.

  5. 05
    Incentives

    Rebates and business incentives can offset cost, but many need approval before work starts.

G-003 How we work

How we deliver your smart upgrade

  1. 1

    Free Estimate

    Tell us what you have in mind. We review your space and goals and give you a clear estimate at no cost.

  2. 2

    Planning + Permits

    We finalize design and scope. Our in-house engineering team prepares drawings, engineering letters and permit applications.

  3. 3

    Material Procurement

    We confirm model numbers, parts and program requirements before anything is ordered, then schedule the work.

  4. 4

    Construction Process

    Our crews build to code with site supervision and regular updates, so you always know where things stand.

  5. 5

    Project Completion

    Final inspection, walkthrough and clean-up. On time, within budget and beyond expectations. That is the MKC Guarantee.

Plan your project
with a free estimate.

We review your space and goals and give you a clear estimate at no cost.

G-203.4 Questions

Questions about smart building upgrades

Don’t see your question? Call (647) 637-6052 or ask in your estimate request.

Can our electrical panel handle an EV charger?

A Level 2 charger has about the same electrical needs as a stove or dryer, 240 volts at around 30 amps, so the first step is checking that your panel can take the extra load. If it can, the install is straightforward. If not, a panel upgrade comes first, which involves your local utility. A Licensed Electrical Contractor must file a notification with the Electrical Safety Authority before the work starts.

Will a heat pump keep us warm in a GTA winter?

A cold-climate air source heat pump is designed to keep working in temperatures as low as -30°C. Sizing and installation decide how well it performs in your house. Home Renovation Savings rebates currently reach up to $7,500 for these units in homes heated with electricity, oil, propane or wood, and up to $2,000 for Enbridge Gas customers heating with natural gas.

Are smart thermostats worth it?

They adjust heating and cooling to your schedule and the season, and in Ontario two programs help cover the cost. The Home Renovation Savings Program offers $125 on eligible models. If the thermostat runs central air, Save on Energy’s Peak Perks pays $75 when you enrol, plus a yearly payment for staying in ($20 in 2026), in exchange for brief adjustments on peak days. Not every model works with every system, so we check compatibility before you buy.

We manage a commercial building. Where do we start?

With the data. Metering and a review of your controls show where energy goes and which equipment runs when it shouldn’t, and scheduling or sensor fixes are often a good first step. Save on Energy’s Retrofit Program offers incentives for equipment and control upgrades with pre-project approval, and its Existing Building Commissioning Program supports tuning up existing systems. Our commercial HVAC team scopes it with you.

What does EV-ready mean in a renovation?

It means the expensive part is done while the walls and floors are open: conduit from the panel to the parking spot, space in the panel, and capacity confirmed by a load calculation. Adding the charger later is then a short job. In a garage renovation or new driveway, running conduit now costs little compared with trenching or opening finished walls afterward.

G-009 Free estimate

Get a free estimate.
Claim up to $2,500 in savings.

Fill out the form to claim up to $2,500 in savings on your next project. Tell us what you’re planning and we’ll book a visit to see the space. Offer terms

  1. 1Tell us about the project (about a minute)
  2. 2We typically reply within 24 hours to book your visit
  3. 3We review your space and goals and give you a clear estimate at no cost
Head office135 Ormont Drive, Unit 11C, North York, ON M9L 1N6

What can we help you with?
(647) 637-6052Free estimate

Your project sheet

One estimate, one site visit and one contract for everything on this list.

    Typical order of work

      Get one estimate